Bathrooms and laundry rooms, by their very definition, are wet areas. Of course, the moistness is acceptable, but only if a waterproofing strategy is in place, one that will protect the construction materials behind the wet area walls. After all, the warm water can splash off an engagingly designed array of wall tiles, but it cannot be allowed to penetrate those tiles and soak through the wall, right? Avoid that excess moisture, the mould and structural damage, by waterproofing wet areas with a superior range of products.
Water, Water Everywhere
A child’s happy splashing sends a spray of foamy water flying. When the adult decides to take a shower or bath, there’s no horseplay, but there’s still a moist splatter of soapy water hitting the walls. Moisture barriers stop the soapy discharge so that the wet torrents stream harmlessly down the walls. Once part of the pooled wet stuff on the shower basin or bathtub bottom, the gathered water funnels its way down the drain, never to be seen again by you or your family.
Waterproofing Wet Areas
The above bathing scenario illustrates how your water flows when the walls are sealed. There are splash panels at the sink, grouted tiles above and around the shower, and silicone caulk around the edges of the bathtub, right where it contacts the wall. It’s thanks to these moisture barriers that the structural surfaces behind the tiles remain dry and mould-free, but what are these caulks and grouts you’re only now hearing about? Well, there’s the acrylic sealants or latex “caulks” that provide a flexible joint between those connective surfaces in your wet areas. Alternatively, modern silicone compounds adhere and cure like a flexible rubber, so the seal they create will stretch and compress as the heat in the bathroom or laundry area rises and falls. Finally, there are powder-based grouts, the mainstay of bathroom waterproofing. Look for rubber floats (A grouting tool) and caulking guns when these waterproofing agents are installed.
Ideally, a whole surface membrane coats wet areas. Rubberised coatings and moisture-approved wall panels form the foundations of that layered approach. After the initial membrane is applied, the tiles and panels, mosaic pieces and backsplash boards are installed. Then, in order to stop mildew and mould growth, waterproof joints are utilised. They’re laid in the open cracks and between the tiles as cement-based grout or as acrylic latex. Top-tier silicone sealants complete this product family, with their flexible material bases really forming a flexible, distortion-proof boundary guard.
Creative Bathrooms and Interiors Uses Environmentally Friendly Products
Creative Bathroom and Interiors recommends and uses products from Davco, the market leader in tile installation products. They are committed to sustainability, aware that they have a responsibility to the environment and working to provide cleaner, safer and healthier adhesive range of products.
It is just as important to use a primer prior to waterproofing.
Davco K10 Plus – A flexible, 1 part, ready to use, water based polyurethane Class III waterproofing membrane. Suitable for interior and exterior applications. Commercial and domestic walls and floors.
Davco Ultraprime – An acrylic surface primer designed to increase the bond strength of tile adhesives and waterproofing membranes. Suitable for interior and exterior applications. Commercial and domestic walls and floors. It acts as a primer and a sealer.
Years ago, homeowners washed their dishes, clothes, prepared meals, ate meals and relaxed all in the same room of the house, namely the kitchen. The houses were simple back then with fewer rooms. As houses transformed into the multi-room structures of today, rooms were allotted for specific uses. This is when the laundry room first came into existence. Today, this room is a highly influential room in the overall value of a house.
Provides Organisation to the Task of Washing Clothes
A laundry room helps you organise and store your pre-treatment, clothes detergent and ironing supplies for easy access and to prevent clutter in other parts of the home. Also, you can wash, dry, fold and iron your clothing items all in one location, which saves you a great deal of time.
Houses the Washer and Dryer
A room specifically for laundry tasks also houses your washer and dryer, both of which can take up substantial space depending upon their models. By installing these appliances in their own room, you conserve space in other rooms for other living functions and activities. In addition, these appliances require special electrical outlets and the washer needs a plumbing hookup on top of this.
Keeps Dirty Clothes Out of Sight of Guests
Another advantage for laundry rooms is the fact that you can keep dirty clothes out of the view of guests who visit or stay with you. Dirty clothes can accumulate quickly and are an eyesore.
Makes Laundry Less of a Chore
The convenience of a laundry room makes washing, drying, folding and ironing clothes less of a chore since you can streamline all of these processes in one location in the house. You will not dread these tasks or procrastinate about performing them as a result.
Features Vary in Today’s Laundry Rooms
Homeowners install various features in their laundry rooms today from hanging racks and clothes storage to work islands. Not all houses will accommodate large laundry areas, though, and an alternative is to hide the washer and dryer in a closet with doors. You can adjust the area according to the space you have in your house. Design your laundry room to suit your space and unique needs.
To create and install the ideal laundry room as a feature in your home, contact Creative Bathrooms & Interiors. We provide you with innovative ideas and plans along with quality joinery and workmanship to bring them into fruition in an attractive, highly functional fashion. Also, we believe in utilising eco-friendly and sustainable materials in all of our projects.